Select Page

Wiper blades are a crucial component of any vehicle, providing clear visibility during rain, snow or other harsh weather conditions. Over time wiper blades can become worn out and start leaving streaks on the windshield, making it difficult to see clearly while driving. Replacing wiper blades can be expensive and time-consuming. So how do you keep your wiper blades in top condition without breaking the bank? We will discuss the step-by-step process of how to recondition wiper blades and extend their lifespan for a fraction of the cost of replacing them entirely.

How to Recondition Wiper Blades?

How to Recondition Wiper Blades

Wiper blades are essential for a clear view during rainy or snowy weather, but they can wear out quickly and leave streaks on the windshield if not maintained properly. you can save money by reconditioning your wiper blades instead of replacing them. Here are some steps to follow:

  • Remove the old wiper blades from your car by lifting them off the windshield and pressing the release tab.
  • Check for any rust on the metal parts of the blade and use a wire brush or sandpaper to scrape it off. This will prevent further damage to your windshield.
  • Wipe off any mold or residue that may have accumulated on the rubber blade with a clean cloth soaked in vinegar or alcohol solution.
  • This will help remove any buildup that could cause smudging or streaking on your windshield.
  • After cleaning your wiper blades, you’ll want to dry them completely before storing them away.

Techniques to Recondition Your Wiper Blades:

How to Recondition Wiper Blades

We discussed basic techniques such as cleaning and lubricating the blades. Regularly reconditioning your wiper blades can improve their lifespan and performance. One common issue with windshield wipers is that they can become worn out and need to be replaced. Removing the windshield wiper arm is necessary for replacing the blades or repairing any damages.

Straightening Tool:

A straightening tool is a simple device that helps to reshape bent wiper blade frames. If you notice that your wiper blades are skipping or leaving streaks on your windshield, it could be due to the curvature of the blade frame being compromised. Using a straightening tool can help you restore the original shape of the frame and improve its effectiveness in clearing away rainwater or snow.

Wiper fluid:

Wiper fluid contains cleaning agents that help remove dirt and debris from the blades’ surface. This buildup can cause streaks and reduce visibility, but by using wiper fluid regularly, you can prevent this from happening. Simply spray some onto the windshield and let it sit for a few seconds before turning on your wipers. The cleaning solution will help remove any dirt or grime that has accumulated on the blades. Another technique you can use is adding vinegar to your wiper fluid mixture.

Compressed Air:

Compressed air is a powerful tool used to clean various components of your car, including wiper blades. It works by removing dirt and debris from the blade’s surface by blowing it away with high-pressure air. Start by lifting each wiper blade away from the windshield and inspecting it for any damage or cracks on its edge or rubber surface. If you find any damage, replace them immediately as this technique works best for cleaning purposes only.

Silicone lubricant:

Silicone lubricant is a viscous liquid that can protect rubber and plastic materials from damage caused by friction and heat. To use this technique, start by cleaning the wiper blades with a soft cloth or sponge and then apply a small amount of silicone lubricant on them. Distribute it evenly along the length of each blade using your fingers or a clean cloth, making sure that there are no lumps or streaks left behind. Allow the silicone lubricant to dry for several minutes before testing out your wipers again.

Vinegar and Water:

To start, mix equal parts of white vinegar and water in a bowl or container. Remove the wiper blade from the vehicle and soak it in the mixture for about 15-20 minutes. This will help break down any built-up debris on the blade, allowing for easier cleaning. Use a soft cloth or sponge to gently clean the blade, making sure to wipe away all dirt and residue.
After cleaning the blade thoroughly with the vinegar and water mixture, rinse it off with cool water to remove any remaining debris or excess cleaner.

Does WD-40 Restore Wiper Blades?

WD-40 is a household name when it comes to lubricants. It is no secret that this multipurpose liquid can do wonders in loosening rusted bolts and preventing squeaky hinges. there has been an ongoing debate on whether WD-40 can restore worn-out wiper blades. Some people swear by the effectiveness of this product in extending the life of their wipers, while others argue that it only provides a temporary solution.

Those who believe that WD-40 can revive their wiper blades claim that it helps remove dirt and debris from the rubber surface, which allows them to glide smoothly across the windshield. They also attest to the fact that after applying WD-40, their wipers become more flexible, resulting in better contact with the glass. They say that using this product regularly can prevent cracks and tears from forming on the rubber blade.


In above paragraphs we have discussed how to Recondition Wiper Blades Reconditioning wiper blades is a simple and cost-effective way to improve their performance and extend their lifespan. With just a few household items and some patience, you can restore your blades to their former glory and enjoy clearer visibility on the road. Remember to regularly clean your blades and replace them when necessary to ensure safe driving in all weather conditions.

Frequently Asked Question:

How Do You Soften Hard Windshield Wipers?

Softening hard windshield wipers is a fairly simple process. you’ll need to remove the wipers from the windshield. To do this, locate the tab on the wiper arm and lift it up. This should allow you to remove the wiper blade from the Arm.

How Do You Restore Rubber Wiper Blades?

Restoring rubber wiper blades is a relatively simple process. you will need to make sure that the blades are free of debris and dirt. This can be done by using a damp cloth or paper towel to wipe away any debris from the blade. Once the blades are clean, you can apply a silicone-based lubricant to the rubber surface of the blade. This will help keep the rubber flexible and reduce friction between it and your windshield.