A broken ignition switch can be frustrating and leave you stranded. It is a common issue many car owners face, but the good news is that there are several ways to start a car with a broken ignition switch. From simple hacks to using specialized tools, we will examine different techniques for starting your vehicle without relying on the ignition switch. We will explore various methods on how to start a car with a broken ignition switch and quickly get you back on the road.
How to Start a Car with a Broken Ignition Switch?
If you have a car with a broken ignition switch, don’t panic! You can still start your vehicle by following these simple steps.
- Gather the necessary tools: a screwdriver, pliers, and a roll of aluminum foil.
- Aluminum foil will be used to construct a reflective fence that intercepts the electromagnetic field.
- Once you have constructed the reflective fence, use the pliers to turn off the circuit. It will trick your car into thinking it’s in park mode even though it’s not.
- Use the screwdriver to get your car moving but avoid disconnecting the pliers or removing the aluminum foil layer, as this will cause your car to stall.
Some Alternative Ways to Start A Car When Ignition Switch Broken:
If inserting tools into your ignition seems too risky, another alternative way to start your car would be by hot wiring it. It involves connecting two wires under the steering wheel, igniting the engine without an ignition key. There may be alternative ways to start your car that you can try before spending money on professional services.
Hotwiring:
When your car’s ignition switch breaks, it can be frustrating and stressful. There is an alternative way to start your car: hotwiring. This technique involves exploring the car’s connection and finding a suitable base issue to make it work. It is essential to exercise caution when doing this, as it can be dangerous if not done correctly.
- Making sure that the keyhole is visible.
- Once you have located the keyhole, attach a jumper wire from the battery’s positive terminal to the positive terminal of the starter solenoid.
- Connect the outside of the jumper wire to the battery’s favorable position.
- Attach another jumper wire from the negative terminal on the battery to the negative post on the starter solenoid.
Flathead Screwdriver:
Starting a car with a flathead screwdriver may sound like something out of an action movie, but it is a valuable skill to have in certain situations. If you find yourself stranded on the side of the road with no key or if your ignition switch has broken, this trick could save you from being stuck. It’s important to note that this should only be used for emergencies and not as a common way to start your vehicle.
Before starting the car with a flathead screwdriver, follow these steps:
- Make sure that the car is off and not just in accessory mode. It will prevent any accidents or injuries while trying to start the vehicle.
- When you have confirmed that the car is off, find a flat surface where you can place the screwdriver under the ignition cylinder.
- Push up on the key and turn it to the left while applying pressure upwards.
Drill and Screwdriver:
If you ever find yourself in a situation where your car’s ignition switch has broken, and you don’t have access to repair services, then there’s an easy solution. Using a screwdriver, You can also locate the ignition switch on the steering column to start your Chevy truck. Insert the screwdriver into the ignition switch and turn it just like you would with a key. All you need is a drill and a screwdriver. With these two tools, starting your car will be as easy as one-two-three.
- Take a new screwdriver and twist it into the key slot until the tip of the screwdriver can touch the starter button, and make sure that it fits snuggly into the slot so that it doesn’t slip out when in use.
- Press down on the screwdriver with moderate force and turn on your drill.
- The spinning motion of the drill will help engage the starter motor easily.
- The training will start your engine without any issues but may not keep running for long periods since there’s no key to support its continuous operation.
Resistor Method:
A simple and effective solution usually exists – the resistor method. This technique involves using a resistor mounted on the front of the engine to help start it. Before starting the car with the resistor, removing the negative battery cable and placing a large piece of copper wire is essential to prevent short-circuiting. The resistor has two wires connected to a metal bar with an R letter. These wires should be linked to both terminals of your vehicle’s battery before connecting them to the starter poles. Once successfully connected, start your engine promptly and disconnect both wires from your battery immediately after ignition; failure could damage your engine.
Conclusion:
A broken ignition switch may seem like a significant problem, but it doesn’t have to leave you stranded. With the techniques outlined in this article, you can start your car without relying on the ignition switch. Whether using a screwdriver or jumper cables, these methods for how to start a car with a broken ignition switch can save you time and frustration. Always remember to prioritize safety and seek professional help if necessary. Don’t let a broken ignition switch get in your daily routine.
Frequently Asked Questions:
How Much Can It Cost To Fix An Ignition Switch?
Suppose you are looking for a more affordable option. In that case, you may consider having a professional repair service look at the issue and provide an estimate before committing to any repairs.
What are some common causes of a broken ignition switch?
The most common cause of a broken ignition switch is wear and tear. Over time, the parts of the switch can become worn down or damaged from constant use. It can cause the switch to become stuck in one position or even prevent it from turning.
How Can You Break The Ignition And Start The Screwdriver?
You’ll need to remove the screws that hold the ignition in place. Insert the drill bit into the hole where the screws were located. Use the drill to turn on the drill bit and break off any remaining ignition pieces. Insert your screwdriver into the hole and turn it until it starts up.